Autosen AL006 Notice D'utilisation page 20

7.2.2 Set sensitivity with prismatic reflector / reflective tape and object
► Start the LR DEVICE software�
► Align the retro-reflective sensor to the object (Fig� 1)�
► Press [Teach SP1 TP1] in the LR DEVICE software�
► Align the retro-reflective sensor to the prismatic reflector or reflective tape
(Fig� 2)�
► Press [Teach SP1 TP2] in the LR DEVICE software�
Either the object can be set first and then the prismatic reflector / reflective
tape, or the other way around�
Fig� 1:
TP1: teach point 1
7.2.3 Setting the maximum sensitivity
► Start the LR DEVICE software�
► Align the sensor so that no light is reflected�
► Press [Teach SP1 TP1] in the LR DEVICE software�
► Press [Teach SP1 TP2] in the LR DEVICE software�
20
Fig� 2:
TP1
TP2: teach point 2
TP2