Publicité
Les langues disponibles
Les langues disponibles
7 Settings
7.1 Settings on the sensor
7.1.1 The sensor is to switch when the object is detected
L +
Fig� 1
L-
Fig� 2
3
7.1.2 The sensor is not to switch when the object is detected
► Position the object (see Fig� 1) and press [OUT OFF] for > 2s�
► Remove the object (see Fig� 2) and press [OUT ON]�
The settings can also be carried out first without object and then with object�
7.1.3 Setting the maximum sensitivity
► Align the sensor so that no light is reflected�
1. The sensor is to switch when the object is detected
► Press [OUT ON] for > 2 s, then [OUT OFF]�
2. The sensor is not to switch when the object is detected
► Press [OUT OFF] for > 2 s, then [OUT ON]�
► Position the object�
► Press [OUT ON] for > 2 s�
> The yellow LED flashes�
> The setting of the sensitivity
with object is made by releasing
[OUT ON]�
► Remove the object�
► Press [OUT OFF]�
> The setting of the sensitivity
without object is made by releasing
[OUT OFF]�
> The yellow LED goes out� Pro-
gramming is completed�
UK
17
Publicité
