Publicité
-
Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
-
Estimated New CPU Clock
This item displays an estimated CPU processor speed.
-
N/B Strap CPU As
This item sets the external hardware reset strap assigned to MCH (Memory Controller Hub).
-
DRAM Spec. (CPU:DRAM)
This item determines the DRAM frequency.
-
Estimated New DRAM Clock
This item displays an estimated DRAM speed.
Voltages Control
This option allows you to switch between the default and user-defined voltages. Leave this
setting at default unless the current voltage setting cannot be detected or is not correct. The
option "User Define" enables you to select the following voltages manually.
OC Guru
Voltage Control
x - Voltage Control
x - CPU Core Voltage
x - DDR2 Voltage
x - CPU VTT Voltage
x - MCH 1.25V Voltage
x - ICH 1.05V Voltage
x - ICHIO 1.5V Voltage
x - DDR2 Reference Voltage
x - CPU GTLREF 0&2
x - CPU GTLREF 1&3
:Move Enter:Select +/-/PU/PD:Value F8:OC On The Fly F10:Save ESC:Exit
-
CPU Core Voltage
This item selects the Core voltage for CPU.
-
DDR2 Voltage
This item selects the voltage for DDR2 memory modules.
-
CPU VTT Voltage
This item selects the VTT voltage for CPU.
-
MCH 1.25V Voltage
This item selects the voltage for MCH (NB).
-
ICH 1.05V Voltage
This item selects the Core voltage for ICH (SB).
IP35 Pro
μGuru Utility v1.01C
Auto Detect
1.3250 C
1.800 V
1.20 V
1.25 V
1.05 V
1.50 V
0%
67%
67%
Item Help ►►
2-3
Publicité
