Télécharger Imprimer la page

ETNA OP670MZ Mode D'emploi page 63

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
Removing the guide rails
Use conventional cleaning products to clean the guide rails.
1. Grasp the guide rails at the front and pivot them towards the middle of the oven.
2. Remove the guide rails from the holes in the side wall.
3. Take the guide rails out of the oven.
Replacing the oven light
The light is a consumer item and therefore does not fall under the guarantee.
The lamp in this household appliance is only suitable for illumination of this appliance. The lamp
is not suitable for household room illumination.
Cut the power to the appliance by removing the plug from the socket or switching off the
fuse in the fuse box!
Top cavity lamp
Turn the cover to the left to remove it.
Pull the bulb out of the fitting.
Side wall cavity lamp
Use a flat-blade screwdriver to snap and remove the lamp cover from the holder.
Be careful not to damage the enamel.
Pull the bulb out of the fitting.
Note
The light can be very hot! Use protection to remove the bulb.
1
3
2
EN 15

Publicité

loading

Ce manuel est également adapté pour:

Op670ti/e01Op670 serie