Télécharger Imprimer la page

ETNA OP670MZ Mode D'emploi page 61

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
Removing the oven door
Note
Keep your fingers away from the hinges of the oven door.
The hinges are spring loaded and can cause injury if they spring back. Make sure that
the hinge latches are applied correctly to lock the hinges.
1. First, fully open the door (as far as it will go).
2. Fold open the two locking levers on the left and right.
3. Slowly close the door as far as the limit stop. With both hands, slightly lift the door and pull
it out from both hinge beds on the appliance.
Starting the Pyrolysis function
1. Make sure the oven space is completely empty and no chunks of
food and fat are present! Close the oven door.
2. Touch (several timers) the oven functions key and select the
pyrolysis function by choosing the right symbol in the display.
3. Touch the start / pause key to start the chosen function. The oven
door will be automatically locked for your safety.
Note!
An unpleasant smell may be emitted from the oven during the cleaning
process. Ventilate the kitchen when the pyrolysis function is running
4. At the end of the cleaning process, you will hear an audible signal.
Touch the start / pause key to stop the audible signal.
5. When the oven has cooled down, wipe it with a damp cloth. Wipe
the oven door and the adjacent surfaces in the gasket area. Do not
rub the gasket.
EN 13

Publicité

loading

Ce manuel est également adapté pour:

Op670ti/e01Op670 serie