Oceanic OCEACLIM120B1 Manuel De L'utilisateur page 114

Function buttons(continued)
SET TEMPERATURE( F)
AUTO
CO OL
DRY
TEMP
ON/ OFF FAN SPEED
MOD E
SWING TIMER ON
SLEEP
TIMER OFF
RESET LOCK
FOLLOW
LE D
ME
DIS PL AY
Model: R51I17/BGCE
112
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
FAN
10
SLEEP Button
HIGH
MED
Select this function during the sleeping time. It
LOW
can maintain the most comfortable temperature
and save energy. This function is available on
COOL or AUTO mode only .
NOTE: While the unit is running under SLEEP mode,
it would be cancelled if any other buttons are pressed.
11
TIMRT OFF Button
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
12
LOCK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
LED Display Button
13
Press this button to clear the display on the
unit, press it again to light the display .