Oceanic OCEACLIM120B1 Manuel De L'utilisateur page 113

Function buttons
SET TEMPERATURE( F)
AUTO
CO OL
DRY
TEMP
1
ON/ OFF
FAN SPEED
MOD E
3
SWING
SLEEP
4
RESET LOCK
FOLLOW
LE D
ME
DIS PL AY
5
6
Model: R51I17/BGCE
TEMP DOWN Button
1
Push this button to decrease the indoor temper-
ature setting in 1 C/2 F decrements to 17 C/62 F.
TEMP UP Button
2
Push this button to increase the indoor temper-
FAN ature setting in 1 C/2 F increments to 30 C/88 F.
HIGH
MED
3 MODE Button
LOW
Each time the button is pressed, the operation
mode is selected in the sequence of the following:
2
7
8
SWING Button (this button is not available on all models)
4
TIMER ON
9
Used to stop or start louver movement and
10
set the desired up/down airflow direction.
TIMER OFF
11
5
FOLLOW ME Button
12
Push this button to initiate the FOLLOW ME
function, the remote controller begins to detect
13
the actual temperature at its location. The
remote controller will send this signal to the
air conditioner every 3 minutes interval . The
air conditioner will beep to indicate the follow me
feature has ended if it does not receive
the signal during any 7 minute interval.
RESET Button
6
Once the recessed RESET button is pressed,
all of the current settings will be cancelled
and the controller will return to the initial settings.
7 ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
8
FAN SPEED Button
Used to select the fan speed in four steps:
9
TIMER ON Button
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
o
o
AUTO COOL
Auto Low Med
o
o
DRY HEAT FAN
High
111