Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
2
Select the DTS NEO:6 mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
3
Play a program source.
4
Select the surround parameter mode.
(Main unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit)
MODE
6
Set the surround parameters according to the mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
MODE CINEMA
CINEMA EQ
DEFAULT
7
Set the various surround parameters.
• CINEMA EQ setting
OFF
44
(Remote control unit)
DOLBY PL
II
cinema
DTS NEO:6
Display
MODE
cinema
(Remote control unit)
(Remote control unit)
cinema
MODE
music
or
or
(Remote control unit)
MODE MUSIC
CENTER IMAGE
DEFAULT
CINEMA EQ OFF
ON
or
or
• CENTER IMAGE setting
C.IMAGE 0.2
0.0
or
• DEFAULT setting
DEFAULT
YES
or
Select "Yes" to reset to the factory defaults.
8
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
Surround parameters q
II
Pro Logic
Mode:
The Cinema mode is for use with stereo television shows and all
programs encoded Dolby Surround.
The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for A/V
systems.
The Pro Logic Emulation mode offers the same robust surround
processing as original Pro Logic in case the source contents is not
of optimum quality.
Select one of the modes ("cinema", "music" or "emulation").
Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the
front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers as a
phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 MUSIC:
CENTER IMAGE (0.0 to 0.5: default 0.2)
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
0.2
0.5
or
Y/N
Y/N
NO
or
Publicité
