Publicité
Les langues disponibles
Les langues disponibles
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1
Select the speaker whose level you want to adjust.
(Main unit)
The channel switches as shown below each time the button
is pressed.
FL
CNTR
"SB" appears only when "POWER AMP ASSIGN" switch
is SURR. BACK position.
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
2
Adjust the level of the selected speaker.
(Main unit)
Only adjustable when the
channel is selected with the
CH VOL buttons on the main
unit.
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using the SELECT knob or
cursor buttons.
SW channel level can be turned off by decreasing one step
from -12 dB.
OFF ´ -12 dB ´ 12 dB
(Remote control unit)
FR
SR
SB
SW
SL
(Remote control unit)
2
1
2
ENGLISH
2
1
41
Publicité
