Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Dolby Surround Pro Logic
1
Select the function to which the component you want to play
is connected.
Example:
(Main unit)
2
Select the Dolby Surround Pro Logic II mode.
(Main unit)
• The Dolby Pro Logic indicator lights.
Display
3
Play a program source with the
• For operating instructions, refer to the manuals of the
respective components.
4
Select the surround parameter mode.
(Main unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit)
MODE
emulation
42
II
mode
(Remote control unit)
(Remote control unit)
Light
Display
MODE
cinema
(Remote control unit)
(Remote control unit)
MODE
cinema
MODE
or
or
1
2
1
mark.
8
5, 7
6
Set the surround parameters according to the mode.
• The mode switches as shown below each time the button
music
is pressed.
MODE EMULATION
CINEMA EQ
2
4, 6
The Dolby Surround Pro Logic II
Cinema or Music mode can be
chosen directly by pressing the
CINEMA or MUSIC button on
the remote control unit during
playback in the Dolby Surround
Pro Logic II mode.
4, 6
5, 7
(Main unit)
(Remote control unit)
MODE CINEMA
CINEMA EQ
DEFAULT
DEFAULT
5, 7
MODE MUSIC
PANORAMA
DIMENSION
CENTER WIDTH
DEFAULT
Publicité
