Télécharger Imprimer la page

Denon AVR-883 Mode D'emploi page 19

Publicité

Les langues disponibles

Les langues disponibles

10 SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 9 to 17), make the
various settings described below on the display.
These settings are required to set up the listening room's AV system centered around the this unit.
• Use the following buttons to set up the system:
1
Set the slide switch to "AUDIO".
2
Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your system and their
Speaker
corresponding sizes (SMALL for regular speakers, LARGE for full-
Configuration
size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
Subwoofer mode
This selects the subwoofer speaker for playing deep bass signals.
Crossover
Set the frequency (Hz) below which the bass sound of the various
Frequency
speakers is to be output from the subwoofer.
This parameter is for optimizing the timing with which the audio
Delay Time
signals are produced from the speakers and subwoofer according to
the listening position.
Digital In
This assigns the digital input jacks for the different
Assignment
input sources.
Video In
This assigns the component video input jacks for the
Assignment
different video input sources.
Auto Surround
Auto surround mode function setting.
Mode
Ext. In SW Level
Set the Ext. In Subwoofer channel playback level.
NOTE:
• The system setup is not displayed when "HEADPHONE ONLY" is selected.
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons (
,
,
,
)
ª
0
1
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Front Sp.
Center Sp.
Large
Small
Front & Subwoofer
12 ft (3.6 m)
12 ft (3.6 m)
Input
CD
DVD/VDP
source
Digital
COAXIAL
OPTICAL 1
Inputs
Input
DVD/VDP
TV/DBS
source
Component
VIDEO 1
VIDEO 2
Inputs
Default settings
Surround Sp.
Surround Back Sp.
Small
Small
Normal
80 Hz
Center
Surround L & R
10 ft (3.0 m)
TV/DBS
VCR-1
VCR-2
OPTICAL 2
OFF
OFF
VCR-1
VCR-2
V. AUX
OFF
OFF
OFF
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
ENGLISH
Subwoofer
Yes
Surround Back
10 ft (3.0 m)
CDR/TAPE
OPTICAL 3
19

Publicité

loading

Ce manuel est également adapté pour:

Avr-1803