Publicité
Les langues disponibles
Les langues disponibles
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 24).
Example:
(Main unit)
w Set the input mode to "AUTO" or DTS.
(Main unit)
2
Select the Dolby/DTS Surround mode.
(Main unit)
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic or DTS NEO:6.
3
Play a program source with the
• The Dolby Digital indicator lights when
DIGITAL
playing Dolby Digital sources.
Light
• The DTS indicator lights when playing
Light
DTS sources.
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
Light
(Main unit)
• Lights when the 6.1 Surround mode is on.
4
Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
NOTE:
• Please
position of the slide switch on the
remote control unit.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Main unit)
,
mark.
(Remote control unit)
make
sure
the
"AUDIO"
1
1 3
3
2
2
1
9
5, 6, 7, 8
1
ENGLISH
2 2
4, 5, 6, 7, 8
5, 6, 7, 8
3
5, 6, 7, 8
45
Publicité
