Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
[2] Listening over headphones
1
Plug the headphones' plug into the
jack.
Connect the headphones to the
PHONES jack.
The pre-out output (including the
speaker output) is automatically
turned off when headphones are
connected.
[3] Turning the sound off temporarily (muting)
1
Use this to turn off the audio output
temporarily.
Press the MUTING button.
Cancelling MUTING mode.
• Press the MUTING button again.
• Muting will also be cancelled
when MASTER VOL is adjusted
up or down.
[4] Combining the currently playing sound with the desired image
1
Simulcast playback
Use this switch to monitor a
video source other than the
audio source.
Press the VIDEO SELECT
button repeatedly until the
desired source appears on
the display.
Cancelling simulcast playback.
• Select "SOURCE" using the video select button.
• Switch the program source to the component
connected to the video input jacks.
[5] Checking the currently playing program source, etc.
Front panel display
1
• Descriptions of the unit's
operations
displayed on the front
panel display. In addition,
the
display
switched to check the
unit's operating status
while playing a source by
pressing
the
button.
2
Using the dimmer function
• Use this to change the
brightness of the display.
The
display
changes in four steps
(bright, medium, dim and
off) by pressing the main
unit's
DIMMER
repeatedly.
BRIGHT
36
(Main unit)
(Remote control unit)
are
also
can
be
(Main unit)
(Remote control unit)
STATUS
brightness
(Main unit)
(Remote control unit)
button
MEDIUM
DIM
OFF
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
PHONES
1
1
1
2
1
1
2
1
Publicité
