klover Dea ECO 6 Mode D'emploi page 88

THE DISPLAY
The device's operating mode is displayed on the console. After turning on the menu, it is possible to choose
many types of visualisations and perform the available settings according to the selected menu.
The picture below describes the meaning of the buttons and LEDs present on the console.
Power set LED
Infrared sensor
Temperature set LED
P1 button
- decrease
- menu
- temperature set
-
-
-
Meaning of the LEDs
LED
TEMPERATURE SET
POWER SET
PROGRAMMABLE
THERMOSTAT
SCREW FEED
FAN
ON/OFF
IGNITION HEATING
ELEMENT
ALARM
Programmable
thermostat LED
P2 button
increase
stove
status
power set
the LED is on when the ambient temperature is being modified
the LED is on when the working power is being modified
the LED is on when at least one switch on/off programme is active.
the LED is on when the pellet loading gearmotor switches on.
the LED is on when the hot air fan is active.
the LED flashes during the ignition, switch-off, STOP ECO stand-by and alarm
phases. The LED is on during the work phase following ignition.
the LED is on when ignition heating element is active.
the LED is on when the stove is in alarm mode.
Mode - power - parameter display
Screw feed LED
Ignition heating element LED
Alarm LED
MEANING WHEN ON
19
Fan LED
ON/OFF LED
P3 button
- ON/OFF
- Esc
- confirm