Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL CONNECTION
The electric connection must be performed by qualified staff only, in conformity to all general and local
safety standards in force.
Check that the power supply voltage and frequency correspond to 220V – 50 Hz.
The device's safety is guaranteed when the latter is properly connected to an efficient earthing system.
In the electric connection to the mains power supply, include a 6 A – Id 30 mA differential magnetothermic
circuit breaker switch with suitable breaking load. The electric connections, including earthing, must be made
after shutting off the electrical system.
When completing the system, bear in mind that the cables must be placed in an unmovable manner and far
from parts subject to high temperatures. During the final wiring of the circuit, only use components with a
suitable electrical protection rating.
KLOVER srl declines all responsibility for injury to persons and animals or damage to objects due to
failure to connect the stove to earth or to comply with IEC specifications.
The electronic control unit manages and controls all the stove functions, and ensures optimal operation of the
device at all times.
The stove can only be installed in a room housing another boiler provided that the latter is a sealed-
chamber device.
THE STOVE MUST BE MOUNTED EXCLUSIVELY BY QUALIFIED PERSONNEL. STRICTLY COMPLY
WITH THE INSTRUCTIONS CONTAINED IN THIS GUIDE.
THE MANUFACTURER DECLINES ANY RESPONSIBILITY FOR DAMAGES CAUSED BY INCORRECT
ASSEMBLY.
DO NOT PASS ELECTRIC CABLES IN THE IMMEDIATE VICINITY OF THE FLUE GAS PIPE, UNLESS THEY
ARE INSULATED WITH SUITABLE MATERIALS.
12
Publicité
