Publicité
Les langues disponibles
Les langues disponibles
KLOVER S.R.L. DECLINES ALL LIABILITY IN CASE OF ACCIDENTS DUE TO FAILURE TO COMPLY
WITH THE SPECIFICATIONS OF THIS MANUAL.
KLOVER S.R.L. DECLINES ALL LIABILITY DUE TO INCORRECT USE OF THE PRODUCT BY THE USER,
UNAUTHORISED MODIFICATION AND/OR REPAIRS, AND USE OF NON-ORIGINAL SPARE PARTS OR
SPARE PARTS NOT SPECIFICALLY DESIGNED FOR USE ON THIS PRODUCT MODEL.
KLOVER S.R.L. SHALL NOT BE HELD LIABLE FOR THE STOVE'S INSTALLATION. THE INSTALLER IS
THE SOLE PARTY RESPONSIBLE FOR THIS OPERATION AND IS ALSO ENTRUSTED WITH CHECKING
THE FLUE, EXTERNAL AIR VENT AND THE CORRECTNESS OF THE PROPOSED INSTALLATION
SOLUTIONS. ALL THE SAFETY REGULATIONS CONTAINED IN THE SPECIFIC LAWS IN FORCE IN THE
COUNTRY OF THE STOVE'S INSTALLATION MUST BE OBSERVED.
EXTRAORDINARY MAINTENANCE MUST ONLY BE PERFORMED BY AUTHORISED AND QUALIFIED
STAFF.
To ensure the validity of the warranty, the user must comply with the indications contained in this
guide and, in particular, must:
−
Use the stove within its operational limits;
−
Regularly perform all maintenance activities;
−
Authorise expert and competent people to use the stove.
Failure to comply with the requirements of this guide shall automatically void the warranty.
Installation Regulations
These operating and instructions cover the basic principles to ensure the correct installation of the pellet
stove, although particulars may need modification to reflect local site conditions. In all cases the installation
must comply with current Building Regulations, Local Authority By-laws and other regulations that affect the
installation of the stove.
The Building Regulations requirements can be met by adopting the relevant recommendations given in
British Standards BS 8303, BS 6461 and BS 7566 as
an alternative means to achieve an equivalent level of performance to that obtained by following the
guidance given in Approved Document J.
Health and Safety
Care must be taken when installing a Klover pellet stove to ensure that the requirements of the Health and
Safety at Work Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling the appliance bearing in mind
the weight of the appliance.
4
Publicité
