CLEANING AND MAINTENANCE
Precautions before cleaning
Before carrying out any cleaning or maintenance operations, make sure that:
−
The stove is turned off and all its parts have cooled down completely;
−
The ash is completely cold;
−
Before re-starting the stove, re-install all previously removed components.
During cleaning operations, use the personal protection devices specified in Directive 89/391/EEC.
The cleaning frequency depends on the type and quality of the pellets used. The schedule indicated below
may therefore vary.
Any problem affecting the stove caused by lack of cleaning will not be covered by the warranty.
Routine cleaning
The stove requires regular cleaning at least every 20 days of operation or after 3-4 ignitions, so as to always
guarantee efficient performance and optimal operation.
Pull the front knob to clean the ventilated hot air tubes above the combustion chamber.
The knob must only be pulled when the stove is turned off and cold.
13