EN
•
Tire Maintenance: Avoid deflating the tires during
storage.
Storage Environment: Store the product in a well-
•
ventilated, clean, and dry area. Note that the battery
charger cannot be used in a wet environment.
•
Charging Process: Refer to the Charging
(Reference 10.3) section and also the Battery
10
MAINTENANCE
10.1 MAINTENANCE SAFETY
•
Specific steps must be taken in order to perform service and maintenance procedures safely.
•
Read and follow all the applicable safety and instructional messages in this manual.
•
Always disengage the mower blades, set the parking brake, shut the mower off, remove the start key, remove the
batteries and wait for all movement to stop prior to performing service and maintenance procedures.
•
Wear appropriate personal protective equipment such as safety shoes, safety glasses, gloves and ear protection.
Long hair, loose clothing or jewelry may get tangled in moving parts. Secure hair above shoulder level before
starting work.
•
Use of parts that are not authorized or approved by Greenworks may cause serious or fatal injury or property
damage.
10.2 BATTERY MAINTENANCE
The mower is powered by Lithium-Ion batteries which, when maintained properly, will provide years of useful life. For
proper care, adhere to the following instructions:
•
Always charge battery after each use. Over-discharge will shorten battery life and risk permanent damage. If a
full charging cycle is not possible immediately after cutting, a 5-10 minute cycle will help maintain battery health.
Fully re-charge the battery within 24 hours after use. To maintain proper calibration, run and charge the mower at
least once a month. Complete a full charge every six months.
•
Keep grass, dirt and debris from collecting in battery area.
•
Charge battery in an enclosed, dry area away from sparks and flames. Never expose charger to rain, water vapor
or other liquids.
•
Do not touch uninsulated portion of charger (terminal pins) or output connector.
•
Do not use charger if cords are damaged.
•
Please refer to the Battery Manual for more information of batteries.
•
To maximize battery lifespan, make sure to fully charge the battery after each use. This is especially crucial when
temperatures drop below 32°F (0°C).
10.2.1 ROUTINE MAINTENANCE
Routine maintenance should include cleaning and inspection.
•
During the battery charging process:
•
Make sure the charging plug connects securely and fully in the socket;
•
Make sure the charger operates without faults;
•
Address any faults and have them repaired before charging.
•
During the operation of the mower and when charging the battery, keep the charging port away from water and
other conductive materials. Never charge when the mower is wet.
•
Charging time will depend on a number of factors, including battery health, ambient temperatures and other
factors. Monitor the battery for abnormal performance or behavior.
10.3 CHARGING
10.3.1 CHARGE THE BATTERY
The batteries can be charged seperately with specific charger (not provided).
Refer to the Battery Manual for more charging information of the batteries.
English
Charger Manual for comprehensive instructions on
using the charger and effectively charging the
battery.
By adhering to these guidelines, you can help increase
the longevity of your mower during periods of storage.
22