AEG HK884406XG Notice D'utilisation page 14

14 www.aeg.com
There is no signal when
you touch the panel sen-
sor fields.
The backlight is on, but
the contrast of the dis-
play is bad.
II and text come on.
comes on.
? comes on.
E and a number come
on.
Problem Possible cause
The signals are deactiva-
ted.
The hot cookware is on
the display.
The Automatic Switch
Off operates.
The Child Safety Device
or the Lock function op-
erates.
No cookware is on the
cooking zone.
The cookware is incor-
rect.
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone.
The cookware does not
cover the cross / square.
There is an error in the
appliance.
Remedy
Activate the signals (refer
to "Deactivation and ac-
tivation of the sounds").
Remove the object and
let the appliance be-
come sufficiently cool. If
the contrast is not clear,
speak to the service cen-
tre.
Deactivate the appliance
and activate it again.
Refer to the chapter
"Daily Use".
Put cookware on the
cooking zone.
Use the correct cook-
ware.
Use cookware with cor-
rect dimensions.
Cover the cross / square
fully.
Disconnect the appli-
ance from the electrical
supply for some time.
Disconnect the fuse from
the electrical system of
the house. Connect it
again. If E comes on
again, speak to the serv-
ice centre.