Installation
6.4
Connect control medium
6.4.1
FC-mode / Faile-safe-to-close
Abb. 17
3/2-way solenoid valves are used to control single acting actuators (FC).
They are mounted either directly to the actuator via a banjo bolt or via a battery
mounting plate or valve cluster, as required.
6.4.2
FO-mode / Fail-safe-to-open
Abb. 18
3/2-way solenoid valves are used to control single acting actuators (FO).
They are mounted either directly to the actuator via a banjo bolt or via a battery
mounting plate or valve cluster, as required.
Instruction Manual
51