Electrical Connections; Connect Unit Plug; Closed Function; Opened Function - GF ER 52-1 Manuel D'utilisation

Electrical Connections

6 Electrical Connections

6.1 Connect unit plug

6.1.1

Closed function

 Connect the position indicator with the unit plug, wiring diagrams see
chapter 7.2
Connect
1
2
3
6.1.2

Opened function

 Change connection No 4 on the microswitch, wiring diagrams see chapter 7.2
 Connect No 2.
6.1.3

Change-over function

 Remove the unit plug and the internal wiring
 Install a PG11 cable gland.
 Connect multiple wires directly to the microswitch connector lug.
Plat pin microswitches
1
2
4
32
Function
Normally open contact for «OPEN» position
Normally open contact for «CLOSED» position
Power supply for both microswitches
Function
Power supply
Normally closed
Normally open
Instruction Manual