Télécharger Imprimer la page

SCANGRIP NOVA 2 CONNECT Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
UK
NOVA 2 CONNECT
WARNING:
Always respect applicable legislation for working with electrical equipment in order to reduce the
risk of accidents.
Avoid looking directly into the beam of light, as this will result in dazzling.
Do not use the lamp near a naked flame.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the
whole luminaire shall be replaced.
Luminaire is only suitable for direct mounting on non-combustible surfaces.
USB POWER OUTLET:
Built-in USB power outlet to charge mobile devices.
Output: 5V, 1A
USE:
To turn the lamp on or off, press the A button.
To increase the brightness, press the B button.
To decrease the brightness, press the C button.
When the brightness level is changed, the new value is
saved, and the lamp will start at that level the next time it is turned on.
BATTERY COMPLIANCE:
The work light is designed to be used with Metabo CAS batteries.
The lamp is also compatible with 3rd party 18V batteries by using the SCANGRIP CONNECT system.
It will accept the following battery voltages; 12V and 18V.
It is possible to use a Scangrip power supply instead of a battery.
WARNING - RISK OF FIRE:
Minimum distance from lighted objects 0.1m
Discarded electrical products must not be disposed of together with household waste. Please
use recycling facilities. Ask your local authority or retailer for advice on recycling.
A
0.1
m
B
C

Publicité

loading

Ce manuel est également adapté pour:

03.6100c