w
q
e
1. Engine stop switch "ENG. STOP"
2. Light switch "LIGHTS"
3. Start switch "START"
1. Coupe-circuit du moteur "ENG. STOP"
2. Contacteur d'éclairage "LIGHTS"
3. Contacteur de démarreur "START"
1. Interruptor de paro del motor "ENG. STOP"
2. Interruptor de luces "LIGHTS"
3. Interruptor de arranque "START"
EBU00053
Handlebar switches
EBU11580
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position before starting the engine. The
engine stop switch controls ignition and can be
used at all times to stop the engine, especially in
an emergency. The engine will not start or run
when the engine stop switch is turned to "OFF".
EBU00056
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
cC
See starting instructions prior to starting
engine (see page 6-3 for details).
4-5