Clarke Fusion 20I Manuel D'utilisation page 40

Figure 1
Figure 2
Page -40-
MAINTENANCE
WARNING: Always wear eye protection and
protective clothing when working
near batteries. Do not put tools or
other metal objects across the
battery terminals or the tops of
the batteries. NO SMOKING!
NOTE: Always engage the parking brake before
servicing the machine.
1. To inspect batteries, remove battery cover.
2. Disconnect the batteries. Use a cloth and a
solution of ammonia or bicarbonate of soda to wipe
the top of the batteries. Clean the battery termi-
nals. Reconnect the batteries.
3. Check dust bag and install new one if necessary.
4. Use a grease gun to lubricate the caster. See
figure 1.
5. Apply a thin lubricant to the drive chain (20 IX only).
WARNING: Maintenance and repairs must be
done by authorized personnel
only.
WARNING: Keep all fasteners tight.
Keep the machine clean, it will need fewer repairs and
have longer life
Do These Procedures When You Begin Your Work
Period
NOTE: Always engage the parking brake before
servicing the machine.
1. Disconnect the plug, on the charger, from the
connector on the back of the machine. See figure
30.
2. Join the connector from the batteries (1) to the
control panel cable connection. See figure 2.
3. Make sure the pad housing and skirt are in correct
position.
4. Make sure the pad is installed correctly.
5. Check the pad and pad driver for damage.
Clarke ® Operator's Manual -Fusion 20 Burnisher