dishwasher. If you have a Fully Integrated Panel, do not
attach mounting brackets until after attaching the panel to
the door.
WARNING
Avoid tip over hazard
Do not use the dishwasher until it is completely
▶
installed. When opening the door on an uninstalled
dishwasher, carefully open the door while supporting
the rear of the unit. Failure to follow this warning can
result in serious injury.
Top and Side Mount
For openings wider than 23 5/8" (600 mm), use the metal
mounting brackets. Top mount is for wood or other
materials that can easily be drilled into. Side mount is for
stone countertops or another hard material that cannot
easily be drilled. Both use the same mounting brackets,
but the difference is the screw placement.
Orient the mounting brackets as shown and position the
▶
tabs into openings on the dishwasher's front corners.
For side mount, bend the brackets down at the
‒
perforation.
Side Mount Force Distributor
The side mount force distributors are for cabinet openings
that are 23 5/8".
1
Depending on the appliance specifications
Insert a side mount force distributor into the opening in
▶
each side. Make sure it is flush with the dishwasher.
4.4 Attaching the Apron
Remove tape covering adhesive strip on the rubber
1.
apron.
Adhere the apron to the front of the dishwasher.
2.
4.5 Install Dishwasher in Cabinet Space
To avoid scratching the floor, use floor protection and
caution when sliding the dishwasher into the cabinet.
NOTICE:
Avoid Hose Kinks
Be careful while pushing dishwasher in. The hoses can
▶
fold, kink or break, potentially causing an obstruction or
leak.
Installation Procedure en-us
1
9