Publicité
Les langues disponibles
Les langues disponibles
Adjust the tension so the door rests open between 2 3/4
2.
in. (70 mm) and 4 11/16 in.(120 mm).
4.11 Attach the 2-part Toe Panel
If your dishwasher has a rubber apron, install the 2-part
1.
toe panel behind the apron.
Place the slotted toe panel on the dishwasher.
2.
It should rest on the floor.
‒
Position the mating front toe panel on top of the rear toe
3.
panel with the angled edge on the mating edge of the
dishwasher.
Make sure the time projector is visible (depending on
4.
the model). Also when attaching the toe panel, ensure
the distances are in the correct ranges.
To secure the toe panels, drive the two black torx
5.
screws through the holes in the toe panel and the
dishwasher base.
To avoid damaging the dishwasher, use the supplied
‒
screws.
4.12 Attach the Outer Toe Panel
NOTICE:
Avoid door interference
To ensure the door can open and close without any
▶
interference, check the clearance when installing the
outer toe panel.
Installation Procedure en-us
13
Publicité
