Publicité
Prior to installation
▶ Download the service app of the appliance manufacturer.
Establishing the WLAN connection in the smartphone
▶ Insert Smart Service Key 2 into the service socket (3.5 mm jack connector).
▶ In the smartphone under settings, select the correct WLAN connection.
▶ Read off and enter the password on the back of the Smart Service Key 2
-or-
▶ Scan the QR code displayed
▶ Once the WLAN connection has been established: start the app.
Smart Service Key Status
•
blue: initialise
•
purple (fading): searching for the connection
•
purple: long-term data recording is running (only visible when the app and
smartphone are disconnected from Smart Service Key 2)
•
yellow (fading): connecting with the smartphone
•
green: communicating with the app
•
red (flashing): no connection possible
Long-term data recording
The Smart Service Key 2 can be used for long-term data recording of up to 14 days.
During the data recording, the Smart Service Key 2 remains on-site with the system.
▶ To start the long-term data recording: first start it from the app.
In the event of a power failure during long-term data recording:
if the Smart Service Key 2 has been charged for at least 30 minutes beforehand, the
time and thus the accuracy of the recorded data are guaranteed for up to 18 hours of
interruption.
16
Smart Service Key 2 – 6721875020 (2023/08)
Publicité
