Citizen JDVD3825PB Manuel D'instructions page 27

Disc
This unit applies to DVD discs from Region 1 or Region ALL.
The loaded Disc (DVD, Audio-CD and MP3-CD) will be recog-
nized automatically.
The suitable Disc-formats are: DVD, CD-R and CD-RW.
Some CD-R/RW discs may be incompatible.
Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or
Photo CD to prevent accidental erasure of prerecorded material.
This unit cannot record disc material in DVD, Audio CD etc.
onto a video tape.
If you press REC/OTR during DVD playback, a symbol mark
" " will appear on the screen for aprox. 4 seconds.
Title
When two or more movies are recorded on a disc, the disc is
divided into two or more sections. Each section is called a
"TITLE".
Chapter
The titles can be subdivided into many sections.
Each section is called a "CHAPTER".
Track
An Audio CD can contain several items.
These are assigned to the tracks.
DVD DISC
TITLE1
CHAPTER 1
CHAPTER 2 CHAPTER 1
CD
Audio-CD
TRACK 1 TRACK 2 TRACK 3
Removing Disc from Case
Be sure to hold the edge of disc. Do
not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of
the disc.
• Do not stick a label or adhesive
tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to
avoid risk of scratches, dirt or
damage.
• Do not leave disc exposed to di-
rect sunlight or in hot or humid
places.
Cleaning Disc
Wipe the disc with a clean, dry
cloth from center to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol
cleaners.
The setup language can be selected.
1
2
3
TITLE2
CHAPTER 2 CHAPTER 3
4
TRACK 4 TRACK 5
If the DVD/VCR does not operate properly: Static electric-
ity, etc., may affect the player's operation. Disconnect the AC
power cord once, then connect it again.
Disc playback operation
Setting setup language
Press VCR/DVD to se-
lect the DVD mode.
(The DVD indicator will
light)
"No Disc" will appear on
the screen. (If a DVD
disc has already loaded,
the playback will start
automatically.)
Press SETUP in the
stop mode. The SETUP
MENU of DVD will ap-
pear on the screen.
Then press to select
"Other".
Press or ENTER to
select "OSD Language".
Press or ENTER
and then press or
to select desired
language (e.g.
English), then press
ENTER.
NOTE: To make the SETUP screen disappear, press
SETUP (or RETURN).
Reading
Language Picture Sound Parental Other
/Enter/Setup/Return
Language Picture Sound Parental Other
OSD Language English
/Enter/Setup/Return
Language Picture Sound Parental Other
OSD Language English English
Francais
Espanol
/Enter/Setup/Return
27