Publicité
Les langues disponibles
Les langues disponibles
Manual clock setting
EXAMPLE: Setting the clock to "8:30 AM", 30th (SAT)
October, 2004.
1
Press VCR MENU.
Press SET + or – to select the
"SYSTEM SETUP" option, then
press ENTER.
2
Press SET + or – to select the
"CLOCK SET" option, then press
ENTER.
3
Press SET + or – to set the month,
then press ENTER.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
NOTES:
• After a power failure or disconnection of the power plug,
the time display will be lost. In this case, set the present
time again if the Auto Clock did not set correctly.
• You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time if the
Auto Clock process did not set them correctly.
• To move cursor backward, press CANCEL.
Tuner setting
This DVD/VCR is equipped with a channel memory
feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the DVD/VCR's memory. In addition to
normal VHF and UHF channels, this DVD/VCR can
receive up to 113 Cable TV channels. To use this DVD/
VCR with an antenna, set the TV/CABLE menu option to
the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
TV/CABLE selection
1
Press VCR MENU.
Press SET + or – to select the "CH
SETUP" mode, then press ENTER.
2
Press SET + or – to select the
TV/CABLE mode.
3
Press ENTER to select the TV or
CABLEmode.
The arrow indicates the selected
mode.
TV
- VHF/UHF channels
CABLE - CABLE TV channels
4
Press VCR MENU until the menu screen is cleared.
20
Automatic memory tuning
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
1
In the "CH SETUP" menu, press
MENU
SET + or – to select "AUTO CH
TIMER REC SET
ON
OFF
AUTO REPEAT
MEMORY", then press ENTER.
SAP
ON
OFF
CH SETUP
SYSTEM SETUP
〈+/-/ENTER/MENU〉
2
The DVD/VCR will begin memorizing all the channels
SYSTEM SETUP
CLOCK SET
available in your area.
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
ON
OFF
STANDARD TIME
To add/delete channels
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
You can add the channels you want or delete the chan-
nels you do not want manualy.
1
MONTH
10
Press VCR MENU.
DAY
30 (SAT)
Press SET + or – to select the
YEAR
2004
TIME
8 : 30 AM
"CH SETUP" mode, then press
〈+/-/ENTER/CANCEL/MENU〉
ENTER.
2
Press SET + or – to select the
"ADD/DELETE" mode, then press
ENTER.
3
Select the desired channel to be
memorized or deleted using SET
+ or – button, or using Number
keys.
4
Press ENTER to select the "ADD" or "DELETE".
5
Press VCR MENU until the menu screen is cleared.
Noise elimination
When you don't want to receive a weak signal broad-
cast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND "ON". When the unit is
shipped from the factory, the NO NOISE BACKGROUND
is set to the "ON".
1
In the "SYSTEM SETUP" menu,
press SET + or – to select " NO
NOISE BACKGROUND".
2
Press ENTER to select the "ON"
MENU
TIMER REC SET
position.
AUTO REPEAT
ON OFF
SAP
ON OFF
CH SETUP
3
Press VCR MENU until the menu screen is cleared.
SYSTEM SETUP
+/-/ENTER/MENU
á
ñ
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
ADD
CH 003
〈+/-/0-9/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
ON
OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
Publicité
