Commissioning; Switch On/Off; Battery Pack - Festool ETSC 125 Li Guide D'utilisation

[1-1] On/Off switch
[1-2]

Battery pack

[1-3] Capacity display
[1-4] Extractor connector
[1-5]
Speed control
[1-6] Sanding pad
[1-7]
Edge protector
[1-8] Handle (insulated gripping surface)
[1-9]
Mains adapter with plug-it connection*
[1-10] Plug-it cable*
[1-11] Long-life dust bag
* not on all versions included in the scope of deliv-
ery

Switch on/off

The switch [1-1] is an on/off switch (I = ON, 0 =
OFF).
 When the battery is empty, or if there is a power
failure or the mains plug is removed, move the
on/off switch immediately to the Off position.
This prevents uncontrolled restarting.
Battery pack
Inserting the battery pack [2a]

Removing the battery pack [2b]

2a
2
1
Capacity display
Pressing the green button on the capacity display
[1-3] shows the charge status of the battery pack:
70 - 100%
40 - 70%

Commissioning

2b
1
2
15 - 40%
< 15%
Recommendation: Charge battery
pack before further use.
Mains adapter
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-

er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be
used.
The mains adapter (available as an accessory de-
pending on the model) combines both cordless and
mains-powered sanding technology, enabling you
to switch between power supply sources. The
mains adapter enables the mobile dust extractor's
automatic electronic switch-on/shut-off function.
 For older mobile dust extractors, the automatic
electronic switch-on/shut-off may only be acti-
11