Springlane Mia Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
1. Lift the lid off the milk container.
2. Place the ribbed stirrer insert into the
milk container.
3. Pour in the desired amount of milk.
Always make sure that the minimum
capacity (100 ml) is reached and that
the maximum capacity (250 ml) is
not exceeded to prevent overheating
and overflowing. Add cocoa or instant
drinking chocolate to the milk in the
container. You should not use more
than 50 g at maximum capacity.
4. Use the lid to close the milk container.
5. Centre the filled milk container on the
magnetic heating plate of the base
station and insert the power plug into
the socket
6. Activate the programme for drinking
chocolate by pressing the operating
button (see section on programme
selection). The stirring and frothing
process begins after activation.
After 3­7 minutes (depending on
the filling quantity and the milk's
initial temperature), the device stops
automatically, and the signal light
turns off. The drinking chocolate is
now ready.
Press the operating button again once to
prematurely terminate the programme –
the device will stop immediately.
24
Attention, the container is very
hot after heating milk – danger
of burns!
NOTE: Overheating protection
The built­in overheating protection
monitors the motor and appliance
temperature. If milk has just been heated,
it is not possible to restart the stirring
and heating process immediately. The
appliance must first cool down somewhat
before it can be used again.
If the filling quantity is too low, the
overheating protection can automatically
switch the motor off. Therefore, always
pay attention to the minimum and
maximum filling capacities (100­250 ml).
Tips for perfect milk froth
1. Fat content of milk: For milk froth
that is as firm as possible, use low­fat
milk with 1.5% fat. For rather creamy
milk froth, use full cream milk with
3.5% fat.
2. Freshness of the milk: Fresh milk is
more difficult to froth than long­life
milk. For consistent froth quality, long
life milk is best.
3. Temperature of the milk: The best
froth results are achieved using
refrigerated milk.
4. Other types of milk: You can use

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

943296

Table des Matières