Replacing An Oven Light; Replacing The Control Knob Led - Furrion F1S17L02A-BL Manuel D'utilisation

3. Flip levers on hinges (one on each side) toward you.
(Fig. 22)
a
Fig. 22
4. Close the door until it stops. It will be about halfway open.
(Fig. 23)
Fig. 23
5. Holding the door firmly on both sides and using both
hands, pull the door straight out of the hinge slots. (Fig. 24,
Fig. 25 and Fig. 26) Hold firmly, the door is heavy.
Fig. 24
Fig. 25
16
b
Fig. 26
6. Place the door on a flat surface that is protected so the
door does not damage the material of the surface.

Replacing an Oven Light

1. Disconnect the oven from the power supply by means of
the switch used to connect the appliance to the electrical
mains, or unplug the appliance if the plug is accessible.
2. Remove the glass cover of the lamp-holder. (Fig. 27)
Fig. 27
3. Remove the lamp and replace with a lamp resistant to
high temperatures (300
characteristics:
- Voltage: 12V
- Wattage: 10W
- Type: G4
- Lamp Type: Halogen
4. Replace the glass cover.
5. Reconnect the power to the oven.
To reorder the Furrion oven light bulb replacement, please
call Furrion service for assistance.

Replacing the Control Knob LED

1. Disconnect the oven from the power supply by means of
the switch used to connect the appliance to the electrical
mains, or unplug the appliance if the plug is accessible.
C / 572 F) with the following
o o