Replacing The Oven Light - Furrion FGR24D3A1A-SS Manuel De L'utilisateur

3. Rotate the Hinge (one on each side) toward you to buckle the
lever. (Fig. 16)
a
Hinge
Lever
b
Fig. 16
4. Close the door until it stops. (Fig. 17)
Fig. 17
5. Holding the door firmly on the left and right sides using both
hands, pull the door straight out of the hinge slots. (Fig. 18 and
Fig. 19)
WARNING
Hold firmly, the door is heavy.
Fig. 18
Fig. 19
CCD-0005506 Rev: 08-16-22
b
6. Place the door on a protected flat place so that the glass door
will not be damaged.
7. Follow the steps below to re-attach to the oven door
(Fig. 20):
− Insert the hinge into the top slot as shown in Fig 20
− Open the door to its fully open position as shown
b
in Fig 20 . Ensure the hinge buckle has released from
the lever as shown in Fig 20
a
Fig. 20

Replacing the Oven Light

1. Disconnect the oven from the power supply by the electrical
mains or fuse.
2. Ensure the oven has cooled before servicing the oven light.
3. Remove the glass cover of the
Fig. 21
4. Remove the lamp and replace with a lamp resistant to high
temperatures (572
o
- Voltage: 12V
- Wattage: 20W
- Type: G4
- Lamp Type: Halogen
5. Replace the glass cover.
6. Reconnect the power to the oven.
To reorder the Furrion oven light bulb replacement, please call
Furrion service for assistance.
- 13 -
c
.
c
Hinge
Lever
lamp-holder. (Fig. 21)
F) with the following characteristics:
a
a
.
b