Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Lid with sealing ring
2. Whisk (frothing)
3. Milk frother
4a. Start button for heating and/or frothing
4b. Start button for just frothing
5. Handle
6. Base
7. Mixer (heating)
8. Maximum indication for heating milk - MAX
9. Maximum indication for frothing milk - MAX
10. Minimum indication
4a 4b
7
3
before first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after
unpacking for any visible damage, possible from transportation. Place the appliance on a stable and heat resistant surface.
Clean the lid, the whisk and the mixer with warm soapy water. Dry the parts thoroughly. Make sure that the parts are
completely dry.
Wipe the exterior and interior with a soft damp cloth and dry thoroughly. The appliance is only suitable heating and frothing
milk. Never fill the appliance with other drinks.
4
preparing milk foam - hot or cold
Check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance and plug the
appliance in.
Lift the lid and fit the whisk in the jug.
Fill the desired amount of milk into the jug. Do not exceed the maximum of the lower max. mark - MAX
milk expands and causes the pitcher to overflow, if filled up too high. The minimum capacity is 75 ml.
Put the lid back on the jug and place the appliance on the base.
Start the preparation by pushing one of the buttons
and the whisk will start turning.
Depending on the filling volume, the preparation stops automatically after 75 to 90 seconds. The control light goes out.
After the preparation is completed, remove the lid upwards and pour or ladle the milk foam into a cup or bowl.
12
•
English
8
9
10
2
- heating and frothing or
- 150 ml. Frothed
- just frothing. The control light will burn
1
2
3
4
5
6
Publicité
