ASSEMBLY
GUIDE
B
Components of AN802
1/ Rectangular structure
1 x Torque Wrench size 17 for
check of the torque value
ASSEMBLY
GUIDE
C
AN801UNI/ ASSEMBLY – Low ANCHORAGE
Same process of top anchorage AN801UNI Installation, for the low anchorage AN801UNI
Installation.AN801UNI
Components of tension system for AN801UNI
2
DELTA PLUS GROUP
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
www.deltaplus.eu
AN802/ ASSEMBLY
1 x P3: Fixation plate
1 x P2: Counter plate
2 x P4: Small counter plate
1 x P5: Plate for spring
2 x S1: Bolt M12 x 160mm
1 x S2: Bolt M8 x 20mm
1 x S3: Bolt M8x45mm
4 x W1: Washer autoblocking D12
4 x W2: Washer D12
6 x N1: M12 Nut
1 x P1:
Spring tension
1 x P2:
Nut M12
2 x S1:
Bolt 12 x160mm
4 x W1: Washer autoblocking D12
4 x W2:
Washers D12
6 x N1:
Nut M12
AN801-AN802- ASSEMBLY GUIDES - (EN) -
Tools for installation
1 x Wrench size 13
1 x Wrench size 19
1 x Torque Wrench
size 19
1 x Allen key size 6
Tools for installation
- Same procedure of installation of AN801UNI
- It is necessary to follow the indication for installation according the
profile of your structure.
- All tightening of bolt should be realized with the torque wrench to
1 x wrench size 19
make sure of the value of tighten.
1 x Torque Wrench
- Loctique glue for screw can also be use on the nuts.
size 19
- Plate and counter plate must be parallele in all the case.
- It is better to position the anchoring point at the nearest position
from the structure.
1 x Torque Wrench size 17 for
check of the torque value
Recommandation
- Do the same process as for the top anchorage AN801UNI
Installation
- It is necessary to follow the indication for installation according the
profile of your structure.
- All tightening of bolt should be realized with the torque wrench to
make sure of the value of tighten.
- Loctique glue for screw can also be use on the nuts..
- Plate and counter plate must be parallele in all the case.
- It is better to position the anchoring point at the nearest position
from the structure.
Recommandation
UPDATE : 04 03 2020