/
"
1
8
/
1
16
Unpack the Refrigerator Drawers
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator drawer(s).
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning on
the refrigerator drawers. Rub a small amount of liquid dish soap
over the glue residue with your fingers. Wipe with warm water
and dry. Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape or glue.
8
Top and Bottom Overlay Drawer Panel Dimensions
(2.5 mm) Holes (Depth
/
3
"
(2 mm) Holes (Depth
/
3
A. Router
INSTALLATION INSTRUCTIONS
23
/
"
(603 mm)
3
4
Top
" (10mm))
8
" (10mm))
8
Back Panel
Bottom
21
/
"
(536.4 mm)
1
8
¹⁄₈
" (2.5 mm) deep.
These products can damage the surface of your refrigerator
drawers. Properly dispose of packaging.
When Moving Your Refrigerator Drawers:
Your refrigerator drawers are heavy. When moving the
appliance for service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the appliance straight out when moving it. Do not wiggle or
"walk" the appliance when trying to move it, as floor
damage could occur.
Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator drawers before using them. See "Cleaning."