Environmental Protection; Environmentally-Friendly Disposal; Energy-Saving Tips; Getting To Know Your Appliance - NEFF T13T42 Série Mode D'emploi

Environmental protection

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.

Energy-saving tips

Always place suitable lids on saucepans. When cooking
■
without a lid, considerably more energy is required. A glass
lid means that you can see inside without having to lift the lid.
Use pots and pans with even bases. Uneven bases increase
■
energy consumption.

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.

The control panel

Displays
Heat settings
-
‚ Š
Operating readiness
‹
Residual heat
• / œ
Keep warm function
–
Timer
‰‰
Controls
Main switch
#
Childproof lock
–

The hotplates

Hotplate
Single-circuit hotplate
$
Dual-circuit hotplate
ð
Extended cooking zone
î
When the hotplate is activated: the corresponding indicator lights up.
Activating and deactivating
Select the hotplate, touch the
Select the hotplate, touch the
The diameter of pot and pan bases should be the same size
■
as the hotplate. In particular, small saucepans on the hotplate
cause energy losses. Please note: cookware manufacturers
often indicate the upper diameter of the saucepan. This is
usually bigger than the diameter of the base of the pan.
Use a small saucepan for small quantities. A larger, less full
■
saucepan requires a lot of energy.
Cook with only a little water. This will save energy. Vitamins
■
and minerals in vegetables are preserved.
Always cover as large an area of the hotplate as possible
■
with your saucepan.
Switch to a lower heat setting in good time.
■
Select a suitable ongoing cooking setting. You will waste
■
energy by using an ongoing cooking setting which is too
high.
Use the residual heat of the hob. For longer cooking times,
■
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
Controls
Keep warm function
–
Automatic zone control
ó
Timer
3
Notes
When you touch a symbol, the respective function is
■
activated.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors. The
■
electronics could overheat.
ó symbol.
symbol.
ó
29