Pelgrim OC560ZWA/P04 Manuel D'utilisation page 170

1. Turning the Wi-Fi module on/off
This function turns appliance operation with Wi-Fi connection on or off.
It is located under the Conn sign. Press the KNOB to display WF on the
display unit. Confirm the selection by pressing on the KNOB.
Rotate the KNOB to select On and confirm your selection. Wi-Fi symbol
will flash or light up.
To turn off the connection and return to previous menu, select OFF.
2. Setting up the Wi-Fi module connection
To set the connection between the Wi-Fi module and the local network,
choose SEt in the the Conn menu. Rotate the KNOB and confirm your
selection. The Wi-Fi symbol flashes with full intensity.
Press the KNOB again to display CSEt on the display unit. Rotate the
KNOB and select On. Confirm your selection.
The appliance will establish a local access point that allows configuring
the parameters for access to the network via the Connectlife app (follow
the instructions in the app).
INFORMATION!
The setting becomes visible when Wi-Fi module is enabled and
connections with the mobile device are established.
3. Connecting an additional mobile device and oven via a server
In the Conn menu, select the setting PAr and confirm your selection by
pressing on the KNOB.
To connect an additional mobile device, rotate the KNOB and select the
setting PAIr. Confirm your selection by pressing on the KNOB. The oven
will connect to your mobile device, which will allow monitoring your
oven's operation.
If you chose the UPA setting, access to the oven and connection to the
server will be disconnected.
(To continue the process, follow the instructions in the Connectlife app).
4. Managing the oven remote control
When the Wi-Fi module is enabled and connections are successfully set
up and synchronized, then the oven can be controlled and operated via
a mobile device and the Connectlife app.
In the Conn menu, select the setting rEn and confirm your selection by
pressing on the KNOB.
29