Symbols; Unpacking And Inspection; Introduction; Operation - Amprobe SM-CAL1 Mode D'emploi

SyMboLS

�
Refer to the manual
Conforms to relevant
�
Australian standards.
�
Warning and Precautions
• when using Sound-Level Calibrator, ambient noise level should > 10dB
below the sound level being measured.

UNPACkINg ANd INSPECtIoN

Your shipping carton should include:
1 SM-CAL1 sound generator
1 1/2" adaptor
1 9 volt battery
1 Manual
if any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.

INtRodUCtIoN

The SM-CAL1 generates a fixed sound level signals for calibration of sound
level meters. The Amprobe SM-CAL1 will work with any sound meter.

oPERAtIoN

1. Turn on sound level meter and configure for 94 dB or 114 dB operation.
2. plug the 1/2 adapter into the SM-CAL1 Sound level calibrator.
3. insert any sound meter microphone into the Sound-Level Calibrator.
4. Turn on power switch and set sound level to 94 dB or 114 dB.
5. observe the sound level meter for proper operation.
Complies with eU
�
directives
do not dispose of this
�
product as unsorted
municipal waste.
5