Publicité
Les langues disponibles
Les langues disponibles
13.2.2
Machine stopping / parking
1.
Select active battery cartridge
2. EBS deactivated / BAS activated
Brake support by motor but the machine must be braked manually by manpower and pushing
the lever mechanic brake when used on slopes. If the machine is to remain in position for a
longer period of time, first bring it onto level ground and secure it against rolling away (chock
under the wheels)
3. EBS activated
4. The machine brakes until it comes to a complete stand still and the braking effect remains active
as long as EBS is activated. Also holds the machine in position on slops up to 20%. If the machine
is to remain in position for a longer period of time, first bring it onto level ground and secure it
against rolling away (chock under the wheels).
NOTE:
Braking function EBS requires battery energy, designed for short times only (max. 15 minutes)
13.3
Charger
Charging the battery:
Voltage display on battery box system indicates the status of the battery:
Voltage display shows 40 V
Voltage display shows 35 V
Voltage display shows < 32 V
NOTE:
• Avoid overheating when charging the battery. Ensure sufficient air supply so that no heat can
accumulate.
• Only charge the battery in an ambient temperature between 0° C and +40° C.
• Allow the battery to cool down after intensive use before recharging it.
• Always charge the battery in a well-ventilated area.
• FIRE HAZARD! Never charge batteries near acids and flammable materials.
• Do not smoke when charging the battery. Keep the battery away from open flames and sparks.
• Allow the battery to cool down immediately after charging.
14
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
14.1
Cleaning
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
• Clean the outer parts with a damp sponge.
• Never clean the electronic parts with water!
• Check the machine and remove the deposits and / or residues with a brush.
ZIPPER MASCHINEN GmbH
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
1. remove battery from battery box
2. connect the charger to the power supply (socket) 230 V /
50 Hz and the charging socket (1)..
3. battery charging
4. When the battery is fully charged (display on the charger),
disconnect the charger again.
5. charging status is indicated by pressing button (2) on the
display (3).
Battery capacity 100%
Battery capacity ~50%
Please charge the battery (too less capacity left)
www.zipper-maschinen.at
7. The Eco or Turbo mode can be selected by
pressing the button (4):
Eco mode: L1 lights up, low battery consumption.
Turbo mode: L1 and L2 light up,
higher power = higher battery consumption.
N O TE
24
ZI-EWB350
Publicité
