SSS Siedle CVB 850-1 Information Produit page 17

Programming – Plug+Play
Procedure – Example
1 Activate the Plug+Play mode at
the SNG 850-..., hold down the pro-
gramming mode button for 5 sec-
onds. LED 1 lights up permanently.
4 Switch off the Plug+Play mode at
the SNG 850-... by briefly pressing
the programming mode key. LED 1
on the SNG 850-... now flashes
again in the normal operating dis-
play. All LEDs on the indoor devices
are off, the system is ready for
operation.
Apartment 1
Apartment 2
2 Set up the indoor device in resi-
dence 1, storey call can be heard as
acknowledgement and the LED
flashes. Indoor device 1 is assigned
to button 1.
Apartment 1
Apartment 2
3 Set up the indoor device in
residence 2, storey call can be heard
and the LED flashes. Indoor device 2
is assigned to button 2.
17