Selecting The Optimum Distance Between The Speakers - Yamaha DVX-700 Mode D'emploi

AIR SURROUND XTREME
■ Shifting the optimum listening
area from side to side
This function shifts the optimum listening area from side
to side according to your listening position for the best
Virtual Surround effect.
The optimum listening area
TOP MENU
INFO.
A-E
SETUP
TV/ STB
DVD/ USB
POSITION AREA
1 Press POSITION to enter position mode.
The current position appears in the front panel display.
2 Press
/ to shift the optimum listening area (L6,
L5, L4, L3, L2, L1, CENTER, R1, R2, R3, R4, R5,
R6).
Adjust the optimum listening area from L1 to L6 when
your listening position is to the left side of the center
position, and adjust the optimum listening area from
R1 to R6 when your listening position is to the right
side of the center position.
The position appears in the front panel display.
P O S I T I O N
3 Press POSITION again or ENTER to exit position
mode.
Hints
– The default setting is CENTER.
– If you press TEST after performing step 1, the
system outputs the test tone for a virtual center
speaker so that you can adjust the position setting.
(Page 45)
– The setting is set for all the input sources.
– This function is available even when surround
mode is off.
Note
If you do not operate this function within 30 seconds
after entering position mode, the system automatically
exits position mode.
44
En
MENU
PRESET
ENTER A-E
RETURN
CODE SET
INPUT 1-4 DOCK
SOUND TEST
R 3
■ Selecting the optimum distance
between the speakers
The surround effect will be changed depending on the
speaker positions. You can set the optimum distance area
to enjoy the best surround effect at your listening position.
80cm (32")
120cm (48")
TOP MENU
INFO.
A-E
SETUP
TV/ STB
DVD/ USB
POSITION AREA
1 Press AREA when the surround mode is activated.
The mode switches to the area setting mode. The
current setting appears in the front panel display.
A R E A N O R M A L
2 Use
/ to select one of the following area.
NARROW: Select this when the distance between
the speakers is about 80 cm.
NORMAL: Select this when the distance between
the speakers is about 120 cm.
WIDE: Select this when the distance between
the speakers is about 200 cm.
Hints
– The default setting is NORMAL.
– When you select WIDE, slightly turn the speakers
toward the listening position to get the better
surround effect.
3 Press AREA or ENTER to apply the setting.
32"
NARROW
42"
NORMAL
Over 42"
WIDE
200cm
MENU
PRESET
ENTER A-E
RETURN
CODE SET
INPUT 1-4 DOCK
SOUND TEST