12.1.1
Metal rack
The metal rack can be used for gratinating
food and supports even heat distribution.
Place the metal rack into the device with the
round spacer facing the direction of the inner
rear wall. Check that the metal rack is placed
correctly.
Attention
► The rubber stoppers may not be removed
from the metal rack.
► Only place the metal rack in the direction
displayed in the diagram.
► Do not place the metal rack on the
12.2 Signal tones
The device transmits the following signal sounds as an acoustic feedback signal:
Two signal tones: The action you requested cannot be performed. You are in another
setting step.
Four signal tones: The end of the cooking time has been reached and "End" is shown
on the display. The "End" only disappears when the door is opened or Stop is pressed.
bottom.
50