Peg-Perego Navetta XL Notice D'emploi page 13

downwards (arrow_c). The handle is useful for carrying the
Navetta XL (fig_d) and for fitting it to chassis and strollers.
7• ROCKING POSITION: The base of the Navetta XL has a
special shape which allows you to rock the child when it is
placed on a flat surface.
8• COT POSITION: It is possible to make the Navetta XL into a
non-rocking cot by opening out the two legs under the base.
9• ADJUSTING THE BACKREST and THE FOOTREST: with the
COMFORT SYSTEM, backrest and footrest can be adjusted
simultaneously. Pull the knob outwards (fig_a) while turning
it (fig_b) to raise or lower the backrest and the footrest.
10• FOUR SEASONS SYSTEM: as shown in the figure, it is
possible to adjust the product's air circulation from the
base in order to prevent condensation.
To create a cool, well ventilated environment (in summer),
open the holes by moving the 4 levers outwards. To limit
the entry of air (in winter), move the levers inwards.
Ganciomatic system
11• Ganciomatic is the quick, practical system that allows you
to attach the Navetta XL to the Ganciomatic clips of a
stroller or the base of a chassis.
To attach the Navetta XL, put it on the stroller or the
chassis and press with both hands until it clicks into place.
Always apply the brakes on the stroller or chassis before
attaching and removing the Navetta XL.
Check that the bassinet unit is properly attached.
• To release it, raise the lever of the Ganciomatic clip
(arrow_a) and lift up the Navetta XL (arrow_b).
Removing the lining
12• REMOVING THE LINING OF THE NAVETTA XL: Unbutton the
hood on the sides and the back (fig_a), press down on the
clips to release them (fig_b) and pull the hood upwards to
remove it.
13• Unbutton the cover and remove it (fig_a), raise the backrest,
detach the inner lining (fig_b) and pull it upwards to
remove it (fig_c).
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
Accessories
14• COVER ALL RAIN CANOPY: made of clear.
15• BAG: satchel with pad for changing baby's diaper. Fastens
to the chassis.
16• AUTO KIT: Request the auto kit (ECE R44/04 certified),
which contains everything you need for mounting the
bassinet unit in your car.
17• BASSINET STAND: Practical, compact support base.
18• COMPLETO TRASPIRANTE: mattress plus cushion.
Compatible with our 3-point car kit.
Serial numbers
19• Information about the production date of Navetta XL can
be found under the base.
• Product name, production date and serial number.
This information is required for any complaints.
How to read the approval label
• This paragraph explains how to interpret the approval label
13