Allegion SCHLAGE BE469 Mode D'emploi page 7

L Programming Mode will automatically time
out after 30 seconds of inactivity.
WRITE YOUR PROgRAMMINg CODE hERE FOR EASY ACCESS
ENTER PROgRAMMINg MODE
FUNCTION
(PRESS)
Add User Code
Delete User
Code
Change
Programming
Code
Enable
Vacation Mode
Disable Vacation Mode
Enable/Disable
Beeper
Delete ALL
User Codes
Removes ALL User Codes from the lock. User Codes cannot be retrieved
Warning
after they are deleted!
Enable/Disable
Lock & Leave
Change User
Code Length
Changing the User Code length will delete all existing User Codes! User
Warning
Codes cannot be retrieved after they are deleted!
Enable/Disable
Auto-Lock
Temporarily Disable
Auto-Lock
(deadbolt should be
locked to begin)
Restore
Auto-Lock
1. Open the door and extend the deadbolt
before beginning.
2. If you make a mistake, press the Outside
Schlage Button to leave Programming
Mode, and then start over.
FUNCTION STEPS
(PRESS)
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit Programming Code
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit
Programming
Code
6 Digit
Programming
Code
4-8 Digit
User Code
Relock the deadbolt using the thumbturn.
FOR USING A STANDALONE UNIT
New 4-8 Same New
Digit User 4-8 Digit
Code User Code
Add another code
4-8 Digit Same 4-8
User Digit User
Code Code
Delete another code
New 6 Same New
Digit 6 Digit
Programmi n g Programming
Code Code
Enable:1 blink + 1 beep
Disable: 2 blinks + 2
6 Digit
Programming
Code
Enable:1 blink + 1 beep
Disable: 2 blinks + 2
Desired Same
User Desired
Code User Code
Length Length
Enable:1 blink + 1 beep
Disable: 2 blinks + 2
Within 5 seconds,
manually lock
and unlock the
deadbolt using
the thumbturn.
VERIFY
2 blinks +
2 beeps
2 blinks +
2 beeps
2 blinks +
2 beeps
2 blinks +
2 beeps
2 blinks +
2 beeps
beeps
2 blinks +
2 beeps
beeps
2 blinks +
2 beeps
beeps
1 blink +
1 beep
2 blinks +
2 beeps
7