The Q-time 1500 is supplied with a turn-knob with ring and spring washer. This
allows the Q-time to be fitted on an appropriate stand. Only choose a firm stand
and ensure that the stand is stable on a perfectly flat and level surface! The draw-
cord control exerts force on the device; it may therefore not become unbalanced!
All other safety regulations also fully apply for the design of the stand.
Use
To use the heater, if required insert the plug into the socket and pull on the pull
switch. Each time that you pull the pull switch, the heater will change to the next
setting:
0 (off)
> 1 (500W) > 2 (1000W)
You are able to view the heater's setting through the peep hole.
Cleaning and maintenance
Before you perform maintenance on the heater, you have to turn off the power
supply. This heater does not require any specific maintenance. Keep the ventilation
and radiation openings, as well as the heat screen, clean and dust-free, but when
cleaning the quartz elements, make sure that you do not touch them; it is best to
blow any dust away frequently. To clean the exterior, use a soft cloth which can be
damp. At the very most, use a mild cleaning agent: no abrasives or sponges and no
caustic substances. If a defect occurs, disconnect the heater from the power supply
and go to a service point. Do not perform any repairs yourself and always ask that
original parts are used in any repairs.
Removal
CE-statement
See page 86.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
> 3 (1500W) > 0 etc.
33