Publicité
Les langues disponibles
Les langues disponibles
Dish
Burner
Custard
Stir constantly
Large
Medium
Dual-
flame
Sponge cake, in
double boiler
Large
Dual-
flame
1
Cook without lid
Cleaning and maintenance
9 Cleaning and maintenance
To keep your appliance working efficiently for a long time,
Cleaning and maintenance
it is important to clean and maintain it carefully.
9.1 Cleaning the appliance
CAUTION
All igniters spark when any single burner is turned on.
Do not touch any of the burners when the cooktop is in
▶
use.
WARNING
Do not clean the cooktop while it is in operation.
NOTICE:
Humidity might enter the appliance interior, if you remove
the control knobs during cleaning. This may damage the
appliance.
Do not remove the control knobs when cleaning the
▶
appliance.
Let the appliance cool down.
1.
Clean with a sponge, water and soap.
2.
Dry with a soft cloth.
3.
Total time
Step 1
Step 1
in min.
Cooking
Heat
method
setting
3 - 8
1
5
8 - 13
1
5
1
8 - 13
3
35 - 40
9
40 - 45
9
Step 1
Step 2
Time in
Cooking
min.
method
3 - 8
8 - 13
8 - 13
35 - 40
40 - 45
9.2 Cleaning the burners
Clean the surfaces of the burners after every use to
prevent them from becoming encrusted.
NOTICE:
Do not clean the burner parts in the dishwasher. They may
be damaged.
Wait until the appliance has cooled.
1.
Scrub with a non-metallic brush and soapy water.
2.
Dry the burners completely. If there are water droplets
3.
or damp patches on the cooktop when you start
cooking, the enamel may be damaged.
Reassemble the burner parts. Ensure that the burner
4.
caps are correctly positioned on the burner bases.
→ "Burner cap and burner base placement", Page 11
9.3 Cleaning the burner grates
Wait until the appliance has cooled.
1.
Carefully lift off the burner grates.
2.
Scrub with a non-metallic brush and soapy water.
3.
Carefully clean around the rubber feet. If the rubber feet
come off, the grates may scratch the cooktop surface.
Dry the burners grates completely. If there are water
4.
droplets or damp patches on the cooktop when you
start cooking, the enamel may be damaged.
Place the burner grates in their proper position.
5.
→ "Burner grates", Page 12
Cleaning and maintenance en-us
Step 2
Step 2
Heat
Time in
setting
min.
23
Publicité
