Publicité
Les langues disponibles
Les langues disponibles
1. Error Condition Indicator
This indicator shall be active when your re-
frigerator cannot perform adequate cooling
or in case of any sensor error. "E" will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These fig-
ures on the indicator provide information to
the authorized service about the error that
has occurred. Exclamation mark may be
displayed when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning shall be removed when the
food is cooled down or when any key is
pressed.
2. Energy Saving (Display Off) Indicator
Energy saving function is enabled automat-
ically and the energy saving symbol lights
up when the door of the product is not
opened or closed for some period of time.
When the energy saving function is active,
all symbols on the display except the en-
ergy saving symbol shall be turned off.
When the energy saving function is active,
pressing any key or opening the door will
deactivate the energy saving function and
the display signals will return to normal.
The energy saving function is a function ac-
tivated ex-factory and cannot be cancelled.
3.Wireless Key
This key is utilized to connect wirelessly to
your appliance through HomeWhiz mobile
application. If the key is pressed for a long
time (3 seconds), the wireless connection
symbol on the display/indicator will blink
slowly (in 0.5 second intervals). The home
network is initialized on the product this
way. After achieving wireless connection
with the product, wireless connection sym-
bol illuminates continuously. You may ac-
tivate/deactivate the connection after the
first setting is completed by pressing this
key. The wireless connection symbol will
flash quickly (at 0.2 second intervals) until
the connection is established. When the
connection becomes active, wireless con-
nection symbol flashes continuously. If the
connection cannot be established for a
long period, check your connection settings
and refer to the "Troubleshooting" section
provided in the user manual. Use Home-
Whiz application for wireless connection.
The installation steps are described on the
application during installation. You may ac-
cess the application by reading the QR
code available on the HomeWhiz label on
the product. The application can be ob-
tained from App Store for IOS devices or
from Play Store for Android devices. For de-
tails visit https://www.homewhiz.com/ ad-
dress.
4. Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. Pressing the key will enable
the cooler compartment temperature to be
set at 8°C,7°C,6°C,°C,4°C,3°C,2°C, and 1 °C.
5. Freezer Compartment Temperature
Setting Key
Temperature setting is made for freezer
compartment. Pressing the key will enable
the freezer compartment temperature to be
set at -18 °C, 19°C, -20 °C, -21 °C, -22 °C, -23
°C, and -24 °C.
6. Deodoriser Module Key
Press this key for 3 seconds to activate/de-
activate the deodoriser feature. When the
deodoriser feature is active, the deodoriser
module icon is illuminated. When the fea-
ture is active, the deodoriser module will be
operated periodically.
7.Quick Freezing Key
When the quick freezing key is pressed the
quick freezing symbol shall be illuminated
and the quick freezing function shall be ac-
tivated. The freezer compartment temper-
ature is set to -27 °C. Press the key again to
cancel the function. The quick freezing
function will be automatically cancelled
after 24 hours. To freeze a large amount of
EN / 17
EN
FR
ES
PL
Publicité
