Publicité
Les langues disponibles
Les langues disponibles
END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while
the
icon flashes.
END TIME
Turn the adjustment knob to set the time you want
cooking to end, then press
the function.
Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can use the adjustment
knob to amend the programmed end time or press
change the settings.
. 6
SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and turn the adjustment
knob to set the required value then press
confirm.
DONENESS / BROWNING
In some 6
Sense functions it is possible to adjust the
th
doneness level.
DONENESS
When prompted, turn the adjustment knob to level
desired between rare (-1) and well done (+1). Press
or
to confirm and start the function.
In the same way, where allowed, in some 6
functions, it's possible to adjust the browning level
between low (-1) and high (+1).
3. ACTIVATE THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
to confirm and activate
to
to
Sense
th
During the delay phase, press
and start the function immediately.
Please note: Once cooking has started, the display will
recommend the most suitable level for each function.
At any time you can press
has been activated.
Please note: If the oven is hot and the function requires a
specific maximum temperature, a message will shown on the
display. Press
to return to previous screen and select a
different function or wait for a complete cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that
the preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven
has reached the set temperature, requiring to "ADD
FOOD".
At this point, open the door, place the food in the
oven, close the door and start cooking by pressing
or
.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it. The cooking time does not include a preheating
phase. You can always change the temperature you want the
oven to reach using the adjustment knob.
5. PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily
paused through deactivating heating elements.
To resume the cooking, close the door.
Some 6
Sense functions will require the food to be
th
turned during cooking.
TURN FOOD
An audible signal will sound and the display shows
the action to be done: Open the door, do the action
prompted by the display and close the door, then
press
to continue cooking.
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
CHECK ON FOOD
Check the food, close the door and press
continue cooking.
Please note: Press
to skip these actions. Otherwise, if no
action is done after a certain time the oven will continue the
cooking.
EN
to skip this phase
to stop the function that
or
to
5
Publicité
