Sabo 38-BV Livret D'entretien page 40

Choke lever on the
engine in the operating
position.
Fuel tank is empty.
Spark plug connector
loose.
Spark plug defective or
dirty or electrode burnt
out.
Excessive petrol supply
to engine (spark plug
wet).
Air filter dirty
Air filter soiled.
Engine power
decreasing
Spark plug clogged with
soot.
Fuel old or soiled
Air filter dirty.
Engine runs irregularly
Spark plug contaminated
with soot.
Engine fastening loose.
Extreme vibration
Ribbed V-belt defective
Blade shaft will not
turn
In case of faults and defects which have not been listed here, please contact the
nearest authorized dealer.
Repairs which require specialized knowledge should only be performed by a qualified
expert. Your authorized dealer will naturally also be glad to help if you do not wish to
perform the maintenance work described here yourself.
20 TECHNICAL DATA
Engine
Motor
Capacity
Rotation speed
Power of Device
Electrode gap
Fuel
Tank capacity
Lubricating oil
Oil quantity
Scarifier
Housing
Operating width
Scarifier cutters
Grass collector capacity
Weight
Length
Place the choke lever on the
engine to "Choke"
position S2 (see "Starting
the engine").
Fill fuel tank with clean and
fresh fuel.
Press on spark plug
connector or have it checked
by an authorized dealer.
Replace or clean spark plug,
set electrode gap to 0.76 mm
Y .
Have it checked by an
authorized dealer.
Clean or replace air filter
insert W .
Clean or replace the air filter
insert W .
Have it checked by an
authorised workshop.
Empty the petrol tank and fill
with fresh petrol.
Clean or replace air filter
insert W .
Have it cleaned by an
authorized dealer.
Have it checked by an
authorized dealer
Have it checked and replaced
if necessary by an authorized
specialist workshop.
B&S 4-stroke motor, 550 Series
(horizontal)
127 cm
3
3400 min
-1
2.3 kW
0.76 mm
Unleaded standard petrol, with
max.10% ethanol
approx. 0,9 litres
SAE 30, SAE 20W50, SAE 15W40 or
similar brand name oil, minimum
quality SF
0.55 – 0.6 litres
Die-cast aluminium
380 mm
15 pieces
55 litres (optional)
37 kg
1320 mm
Width
Height
Wheels front / rear
Bearing front / rear
Sound power level
Guaranteed sound power level;
measured according to 2000/14/EC
Sound pressure level
Emission sound pressure level at operator's workplace;
measured according to DIN EN 13684
Measuring inaccuracy; according to ISO 4871
Vibrations
Vibrations on the handlebar;
measured according to DIN EN 13684
Measuring inaccuracy; according EN12096
21 ORIGINAL SPARE PARTS
Roller bearing grease
Spark plug
Grass sack
Air filter insert
Scarifying blades
10
550 mm
1000 mm
Ø 180 mm / Ø 180 mm
Cup-and-cone bearing
L = 98 dB(A)
wa
L = 83 dB(A)
pA
1.5 dB
a = 4.7 m/s
hW
2.4 m/s
SAA11300
M802138
SA561
To be ordered from B&S using the number
796970
For safety reasons, scarifying blades must
always be replaced by an authorised
workshop.
This workshop has the respective spare
part numbers for the scarifying blades
available.
2
2